How To Share GPS From An Android Phone To An iPad [Guide]

The absence of GPS capability in the WiFi-only iPad was termed a dealbreaker by some when it was released and again when its 2nd generation counterpart hit the market. With either of the two devices, the only time the OS allows you to view your location on a map or, say, geotag a photo is while you’re connected to a WiFi hotspot. Furthermore, location data returned via WiFi triangulation is only as accurate as the number of WiFi access points in range, that is, usually not that accurate. Looking for a workaround? Look no further. If you’re one of those tech enthusiasts who own both a jailbroken iPad and an Android phone, then the following workaround should make your GPS-deprived iPad whole. It involves a Cydia Store application by the name of BTstack GPS and a GPS-over-bluetooth sharing Android app. As of this writing, BTstack only works with select GPS units and, as you will see in the guide that follows, Android phones. The developers behind the app are still working to find a an iPhone-to-iPad GPS forwarding solution.

Following is a step-by-step guide for GPS data forwarding from an Android phone to an iPad.

1. Launch Cydia, search for BTstack GPS and install. To use BTstack GPS with other applications, you will have to purchase the $5 full version. The demo version of the app merely displays your location within the app, allowing you to test your GPS forwarding setup. The app requires iOS 3.0 or higher.

2. Download and install any of the following (free) apps on your Android phone. We tested this setup successfully with the first two.

BTstack-GPS-Cydia-Store

2. Exit Cydia, open the Settings menu and turn Bluetooth off if it is on (BTstack uses its own Bluetooth stack to connect to external GPS devices).

3. Select BTstack from under Extensions and set BTstack as the Active Bluetooth Stack.

Active-Bluetooth-stack-BTstack

4. Launch BTstack GPS.

5. On your Android device, navigate to Settings > Wireless & network settings > Bluetooth settings, turn Bluetooth ON and check Discoverable. You should now see your device in the Devices list within BTstack GPS.

6. Under Bluetooth devices hold down on / select your iPad to pair with it, enter a PIN of your choice in the dialogue box that follows and tap OK.

Pair-&-ConnectEntering-PIN

7. A pairing request should now appear on your iPad. Type the same PIN you entered before and tap OK to confirm.

Entering-PIN-on-iPad

8. Once both devices are paired, you may launch any one of the aforementioned GPS forwarding apps to begin sharing GPS data with your iPad.

If, for instance, you plan to use Bluetooth GPS Output, launch the app and simply select your phone from the list of devices in BTstack. With ShareGPS, you can establish a connection either by selecting your phone from within BTstack GPS or by selecting your iPad from within ShareGPS (Menu > Connect Bluetooth device).

ShareGPS-for-AndroidBluetooth-GPS-Output-For-Android

9. As soon as a connection is established, BTstack GPS displays your location, or rather, the location of your Android phone on a map below additional GPS data.

Android-To-BTstack-GPS-Forwarding-(Sharing)

BTstack GPS remembers the last device you connected to, allowing you quick access to it next time you launch the app.

Last-Used-External-GPS-device

If you get stuck somewhere, feel free to leave a query in the comment section below.

[via How-To Geek]

قالب وردپرس

About Alyse Kalish

Alyse Kalish
As an Associate Editor for The SalesJobInfo, Alyse is proud to prove that yes, English majors can change the world. She calls many places home, including Illinois where she grew up and the small town of Hamilton where she attended Colgate University, but she was born to be a New Yorker. In addition to being an avid writer, Alyse loves to dance, both professionally and while waiting for the subway.

Leave a Reply

Your email address will not be published. Required fields are marked *